ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
0
50
100
150
200
225
Pre-Setup Checks
• Examine the machine for signs of transit damage. If damaged, do
not use, return to place of purchase
• The compressor should be set up near to the user.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms. The
compressor is designed to be used in dry rooms. It is prohibited
to use the compressor in areas where work is conducted with
sprayed water.
• Before you use the machine, make sure that the mains voltage
complies with the specifications on the rating plate.
WARNING!
ALWAYS KEEP THE COMPRESSOR
UPRIGHT. TIPPING THE COMPRESSOR ON ITS SIDE
MAY CAUSE THE OIL IN THE MOTOR TO LEAK OUT
AND DAMAGE THE UNIT.
Attaching The Support
Foot
1. Insert the support foot bolt
through the hole in the frame
for the support foot and
secure it in place with a Nyloc
nut.
Attaching The Wheels
1. Place the bolt on a wheel
assembly through the hole in
the wheel bracket and fasten
it in position with a Nyloc nut.
2. Repeat step 1 to fit the second wheel on the opposite side of the
tank.
1. Safety Relief Valve
2. Oil Sealing Plug
3. Intake Air Filter
4. Overload Reset Switch
5. Oil Filler Opening
6. Oil Drainage Screw
7. Oil Level Window
8. Motor Housing
9. On/Off Button
10. Pressure Regulator
11. Transport Handle
12. Regulated Pressure Outlet
13. Regulated Pressure Gauge
14. Pressure Tank
15. Support Foot
16. Drain Valve
17. Wheels
AIR COMPRESSOR
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
8
10
3
2
4
5
6
9
1
12
7
14
16
15
11
13
17
WARNING!
ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
