7 • Oz Charge manual
www.ozcharge.com.au
STEP 4 - Disconnecting the Battery charger from Battery
•
If the Battery is out of the vehicle:
(1) Switch OFF and Remove the AC Power Socket from the outlet.
(2) Remove the Black lead and then the Red lead.
•
If the battery is still in the vehicle:
(1) Switch OFF and Remove the AC Power Socket from the outlet.
(2) Remove the lead from the vehicle chassis.
(3) Remove the lead from the battery.
Note: Check electrolyte levels if possible after charging as they may need topping up with distilled
water. (This does not apply to sealed maintenance free batteries)
LED STATUS INDICATOR TABLE:
LED
Status
Description
Power / Fault LED – Green / Red
Green
ON
AC power is connected
Green
Flash
ECO mode and no battery connected
Red
ON
Short circuit / reverse polarity connection
Red
Flash (Slow) Automatic Rejuvenation or charge cycle has timed out
Red
Flash (Fast) Over temperature protection mode
Charge / Reconditioning LED – Blue / Yellow
Blue
Flash
Rejuvenation (Reconditioning) or Soft start charging
Blue
ON
Bulk charge or Absorption charging
Yellow
ON
Battery is flat (less than 3V) or Battery failed analysis test
Full LED -Green
Green
ON
Fully charged - Float / Maintenance mode
RED
BLACK
RED
BLACK
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
