Step 9: Attach optional lights
1) Insert battery pack (batteries not included)
into pocket along the eave and close the
flap.
2) Thread the light rope through the
white loops along the roof line.
Secure the end of the rope to the clip.
Disassembly
Packing the tent
Step 8: Secure guy lines
1) Secure tent using all guy lines and stakes.
Tent must be secured for proper function.
1) To take down the tent, disassemble in
reverse order.
2) Remove accessories (if included).
3) Remove and fold fly.
4) Be sure to leave doors and windows
unzipped to avoid zipper damage.
5) Remove stakes with hammers or stake
puller. DO NOT pull on tent.
6) Carefully disengage poles from fast feet.
Push poles away from you through the
sleeves to minimize risk of damage to
tent or poles.
7) Keep poles and stakes together in bags
provided.
1) Spread tent flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag, skin and fly forcing air
through unzipped door.
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Tent must be clean and dry before storage.
Store off concrete floor.
Be certain campfires are extinguished.
Dispose of trash appropriately.
Dimension A should
be close to but not
exceed the length
of the pole bag.
A
Fold tent into a
rectangular shape.
Front of tent
(door unzipped)
Step 7: Attach fly
1) Unfold the fly and position over the tent so the guy line is at the rear of the tent.
2) Wrap the hook and loop fasteners,sewn on the underside of the fly, around the fiberglass poles.
3) Attach the fly to the tent by attaching the plastic s-hook on the fly to the loops located
along the sides of the tent.
4) Attach webbing strap at center front of fly to loop at the center of front pole.
WT191812 09/18
Step 6: Raise tent with Easy-Set Loop, attach hooks and stake tent
1) Locate the Easy-Set Loop at the back of the tent. Pull the loop in a slow and steady manner
to extend the tent floor.
2) Clip the black pole hooks to the tent frame.
3) Stake the tent by inserting a stake through remaining stake loops, along the tent perimeter.
4) Make certain the tent floor is pulled out evenly and tightly.
5) Hammer the stakes into the ground at a 45° angle using a hammer or mallet.
