SENIOR
SENIOR
BAOBAB
BAOBAB
Tent & Frame assembly
1. Lay out the frame on the ground, the frame is assembled by matching the coloured poles to the
matching coloured corners.
2. Start by building the roof section of the frame first. The verandah section of the roof is held up
by 3 loose poles. 2,2m in the centre and 1,8m on the sides
3. Insert the top half of the poles into the roof section and place the frame in the desired position.
4. Pull the canvas skin over the frame.
5. Lift the frame and insert the bottom half of the poles 1 side at a time
6. Bring the bow tent and extension together and clip the link pole onto the top of the bow tent
and hook the flysheet legs onto the bow tent frame.
7. The gussets of the extension are attached to the bow tent frame with velcro to form an effective seal.
8. Attach the extension canvas to the frame with the velcro sewn into the inside seams.
9. Peg the bottom of the canvas to the ground at all the anchor points using straight pegs.
10. Secure the guy ropes with the anchor pegs, remember the rope at the crown of the bow tent.
11. The flaps at the side can be extended with extra poles (not provided) to extend the shade.
12. See overleaf for more instructions.
This extension tent is erected over a steel frame which is then coupled to the bow tent with
a pole from the steel frame to the top of the bow tent frame.
The bow tent flysheet is not used as the extension has it’s own flysheet for the bow tent
Go to
to view instructional videos on how to erect your tent
www.tentco.co.za
