Step 1:
Verify Package Contents
Verify package contents by emptying contents of
bag(s) and confirming all parts are included and
undamaged. Do this at home before you leave on
your trip.
Step 2:
Lay Out the Screen House
Select a smooth level site. Lay all parts of the
structure out on a flat open area. Extend poles
and sort into groups, ie. roof poles, side poles.
This will simplify the assembly process.
Step 3:
Assemble Screen House
A)
Lay fabric body underside up.
B)
Using the shorter Roof Middle
Pole(RMPL-187BK), slide pole
through the loop in the center of
ceiling. Place ends in pole pock-
ets on fabric body located above
door zippers.
C)
Using the longer Roof Poles
(RPOL-311BK), slide poles
through the center loop, creating
an “X”. Gently flex each pole and
place ends in ribbed end of Elbow
Connector (EL40-151-3), located
on the fabic body where the cor-
ner meets the screen.
D)
Secure all poles using the
nylon fastners located on ceiling.
E)
Flip fabric body over.
F)
Place a steel Leg Pole (LPOL-
183BK) into the smooth end of
Elbow Connector (EL40-151-3).
Repeat for all leg poles.
G)
Adjust legs so that the screening
fits firmly into place. Hook the J-hooks
at the screen house base corners into
one of the holes in the base of the
Leg Poles.
Step 4:
Stake Screen House
A)
Stake screen house by driving
stakes though the webbing loops on
base of screen house.
B)
To secure guy lines, find the guy
line plastic slider and look for the
portion of the line opposite the
knot. Pull this portion, forming a
loop (works like a slip knot). Extend
guy line to ground and stake. Repeat
with remaining guy lines.
ASSEMBLY INSTRUCTIONS
THIS RECREATIONAL PRODUCT REQUIRES TWO ADULTS TO ASSEMBLE.
*
Unless otherwise specified all instructions will be given assuming the assembler is facing the front opening of the product.
*
Carefully fold out your poles, using caution to prevent snapping the shock-cording. Make sure each pole segment is “seated” into the next
section before flexing the pole during set-up.
*
Do not drop pole bag. Do not bounce bag on its end to remove product, as these actions may damage the shock-cording and/or pole ends.
DISASSEMBLY INSTRUCTIONS
Step 1:
Remove the Stakes
Carefully remove stakes by pulling out the hook
ends. Do not pull or tug at the stake loops sewn
onto the fabic body. Remove excess soil from the
stakes and store them in their bag.
Step 2:
Take Down Screen House
A)
Unhook J-hooks from leg poles. Lift screening
and pull leg pole out of hub. Repeat with all leg
poles.
B)
Flip fabic over and remove nylon fastners.
C)
Remove the longer poles first by gently
flexing pole to release from hub. Slide out of loop.
D)
Slowly slide the shorter pole out of pole pock-
ets. Slide out of center loop.
E)
Collapse all poles and store them in the pole bag.
Step 3:
Fold the Screen House
Fold fabric into rectangular shape the width of pole
bag. Lay pole bag at one end of fabic and roll tight-
ly together, slowly squeezing air out as you go.
Store screenhouse in carry bag provided.
(Following these instructions will make it easier to
fit tent into bag.)
* Make sure all doors are unzipped to disassemble.
* Store all poles and stakes in their corresponding bags to prevent possible tearing or damage to fabric.
CAMPERS WANT TO KNOW
Why are there three holes on a leg pole?
Humidity, climate and other factors play a role in
how your recreational product works each time
you bring it out for use. Choose the hole nearest
the J-hook that allows you the best fit.
Содержание WMT-1290S
Страница 1: ......
