WT192114
ASSEMBLY INSTRUCTIONS
Verify Package Contents and Assemble Poles
Fly: 1 each
2) Assemble steel poles by inserting the
tapered ends into the adjacent sections.
1) Verify package contents as listed below
Steel poles : 33 each (total)
( ) denotes color coding
Tent Stakes : 18 each
Color Coded Connectors: 17 each
(A) Eave Rear Center – Blue :1 each
(B) Eave Rear End – Pink : 2 each
(B1) Eave Front – Pink : 2 each
(F) Roof Corner – Green : 4 each
(G) Roof Middle – Red : 4 each
(E1) Leg Door : 4 each
(E) Leg Main : 6 each
(D) Eave Side – Yellow : 2 each
(C) Ridge – Grey : 2 each
IMPORTANT NOTES:
* Assemble your tent before camping to become
familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsite free
of debris and sharp objects, away from a
natural watercourse.
* Guy line must be used for proper tent function.
(I) Roof Front Room – Orange : 4 each
(J) Eave Front Room – White : 2 each
(H) Ridge Front Room– Ivory : 1 each
Mesh Panel : 2 each
Window Panel : 7 each
Door Panel : 2 each
Rope Light : 2 each
(batteries not included)
1) Assemble the roof frame as shown below matching color-coded poles to color coded connectors. Use the diagram below and the replacement
parts listing on page 4 as reference. Make certain the metal springs lock into place on all the connectors. It may be helpful to layout poles and
hubs, matching color coding before beginning assembly.
2) Attach ridge and roof poles:
(C) Grey Ridge
(H) Ivory Ridge Front Room
(F) Green Roof Corner
(G) Red Roof Middle
(I) Orange Roof Front Room
3) Attach eave poles:
(A) Blue Eave Rear Center
(B) Pink Eave Rear End
(B1) Pink Eave Front
(D) Yellow Eave Side
(J) White Eave Front Room
Step1: Assemble roof frame
Step2: Attach leg poles
A
4
3
1
1
2
6
B1 B
C
D
E
E1
E1
E1
E1
J
H
I
F
G
10
5
8
9
11
3
4
7
A
A
7
B
B
A
B
B1
1) Unseat the bottom section of the leg poles.
This will lower the roof frame to aid in
attaching the fly of the tent.
2) Along the back of the tent attach leg poles
(E, un-tapered end) snapping R-springs into
connector slots.
3) Repeat the process for remaining leg poles
(E) at front tent corners. Use leg poles
(E1, tapered ends for front door).
WT192114 10/18
