OZ Racing E-LEGGERA, Руководство пользователя

Страница: 31 / 31

Electric Bicycle Manual
30
8.6 Tyres
Bicycle comes fitted as standard with specialised, high-performance tyres
designed to give the best combination of low rolling resistance, light weight
and puncture resistance. To maximise performance, we do not recommend
that you use lower quality tyres than those supplied with bicycle.
We recommend that you operate bicycle with tyre pressures of 25–30 psi
on the front and 40–50 psi on the rear. This will give the best balance of
low rolling resistance and comfort. Running a relatively softer front acts as
a “cushioning effect”, reducing shock loads to the motor fork components—
specifically the clutch and gearbox.
We do not recommend that you inflate the tyres to more than 60 psi.
Inflation pressures greater than 60 psi will reduce comfort and the service
life of the product.
WARNING! Inflating the front tyre to more than 30 psi places high shock
loads into the motor drive system (motor, gearbox and clutch) whilst using
the power on acceleration or over rough roads. Just like in a car as you
would not accelerate rapidly on very rough roads, do not use motor power
when going over potholes or speed bumps or similar obstructions in the
road.
Operating the bicycle with a front tyre pressure greater than 30psi and/or
using the motor assistance on rough terrain, against these
recommendations, will invalidate the warranty.
When changing a tyre, always use plastic tyre levers. Never use a metal
tyre lever as you will damage the wheel rim.
WARNING! Bicycle tyres do not last forever. When the tread depth is
critically low and the centreline grooves in the tyre have worn down in any
part of the tyre, it may be dangerous to continue to ride on the tyre, and in
this event, we recommend that you replace the tyre.