OZ Racing E-LEGGERA, Руководство пользователя

Страница: 17 / 31

Electric Bicycle Manual
16
line should be avoided, so a tail sleeve had best be covered on the line
end.
. The brake cable should be regularly taken out to be oiled, to avoid too
large resistance arisen from rust.
. The brake cable in a linear way has the best function, and if it must be
bent, the turning with a small arc should be avoided as far as possible.
. The length of the brake cable is based on the principle that it will not be
stuck when the handlebar turns left or right to the limit.
Common sense of the use of braking system
：
* When the distance between the brake pads and the Rim is too large, it is
adjusted by the Brake handle or the adjusting screw on the folder gate
device.
* When the lines of the brake pads are worn seriously, replace it timely in
order to maintain traffic safety.
* When not riding for a long time, please loosen the folder device to avoid
fatigue of flexibility, but pay attention to recovery of the gate device before
riding.
* When riding in rainy days, the function of any gate device will be
weakened, so please keep a longer safe braking distance and reduce the
speed.
* The surface on the brake disc, shoe block may not be oiled, so as to
avoid serious injury.
* If the brake cable is ripped, it may cause the brake cable to be broken
and this is very dangerous, please replace timely.
4.9 Chain