OC-SR10 Manual - Rev 1.1
SPECIFICATIONS
1
Electrical Parameters
1-1
Normal input solar cell array voltage :
16.5
Typ.
Vdc
1-2
Max. solar cell array voltage (when output has no load)
23
Max.
Vdc
1-3
Current Consumption when connected 15V Array (battery not present) :
30
Max.
mAdc
1-4
Current Consumption when connected 12V battery (Array not present) :
15
Max.
mAdc
2
Output Control & metering Characteristics
2-1
Normal Start up Charging Condition :
2-1-1
Charging start when Battery voltage not less than
5.0
+/- 1
Vdc
2-1-2
Input solar cell array voltage
16.5
Typ.
Vdc
2-2
Charging current (continuous) :
10
Adc
2-3
Charging current (Peak), Max (30 seconds)
12
Adc
2-4
Level 1 Cut-out Control Voltage:(for GEL Battery)
14.5
+/- 0.3
Vdc
2-5
Level 1 Cut-out Control Voltage: (for AGM/Conventional Flooded Battery)
14.7
+/- 0.3
Vdc
2-6
Level 2 Cut-in Control Voltage:(for GEL Battery)
13.6
+/- 0.3
Vdc
2-7
Level 2 Cut-in Control Voltage:(for AGM/Conventional Flooded Battery)
13.8
+/- 0.3
Vdc
2-8
Minimum LCD Display Voltage *
6.0
+/- 0.3
Vdc
2-9
Maximum LCD Display Voltage *
19.0
+/- 0.3
Vdc
Note :
* The voltage range may be out of these ranges when input current is different.
3
Protection
3-1-1
Over temperature protection active at above *
85
o
C
3-1-2
The charger will resume the charging at about
75
o
C
3-2
Battery Reversed Protection
Note :
* When over temperature protection is activated, the Yellow LED will be "OFF".
4
Electrical Parts
4-1
Input Lead (Array ) specifications :
SPT-1 18AWG x 2C 105*C, External length : 915mm
4-2
Output Lead (Battery ) specifications :
SPT-1 18AWG x 2C 105*C, External length : 915mm
(Two terminals - 10mm ring terminal for Positive, 8mm ring
terminal for Negative)
5
Physical Parameters
5-1
Panel material :
Plastic, Standard ABS
5-2
Panel Dimension :
120 (W) x 75 (H) mm
5-3
Panel Cut Out Size:
100 (W) x 63 (H) mm
5-4
Overall Depth :
approx. 25 mm
5-5
Net weight :
approx. 200g
6
Environmental Characteristics
6-1
Operating temperature :
-5 to 50
o
C
6-2
Storage temperature :
-10 to 70
o
C
6-3
Operating Humidity range :
0 to 80% RH
2 YEAR MANUFACTURER WARRANTY
Zylux Distribution Pty. Ltd. (OzCharge) warrants to the Customer that this product is substantially free from defects in materials and
workmanship under normal use for a period of 2 Years from the Date of Purchase.
Please ensure you keep a copy of your receipt on file as this will be required for proof of purchase and to validate your warranty.
Obtaining Warranty Service
Within the warranty period, the Customer must contact the authorised supplier / retailer where the product was purchased or
alternatively you can contact the OzCharge service centre through one of the following methods:
Hotline
: (03) 9482 2203
Website
:
www.ozcharge.com.au
If the Authorised Supplier and / or OzCharge service centre concludes that while under normal use, a product failure or malfunction
occurred during the warranty period and was caused by a defect in material or workmanship (see Exclusions), the Customer will be
asked to ship to the nearest service point. The product must be packaged appropriately for safe shipment. To prove that the product is
under warranty, the customer should enclose a copy of their receipt for proof of purchase. It is recommended that returned products be
sent by registered mail as Zylux Distribution Pty Ptd. (OzCharge) accepts no responsibility / liability for goods lost or damaged in transit.
Return Shipping costs to be incurred by the Customer.
Exclusions
If upon receiving a product for repair and if testing and examining the product has disclosed that the alleged defect or malfunction in the
product does not exist or was caused by the Customer or any third persons misuse, physical abuse, water damage, unauthorised
attempts to open, repair or modify the product or improper installation, this will not be covered under this warranty.
This Warranty is void if:
1. The product has been tampered or repaired by unauthorised personnel.
2. The warranty seal is broken or altered.
3. The warranty period has expired.
