4 • Oz Charge manual
www.ozcharge.com.au
ELECTRICAL PARTS & ACCESSORIES:
AC Power Cord:
1.8m with SAA 2 Pin AU Plug
DC Output Lead:
1.2m with quick connect
Charging Leads:
Quick connect 60cm Crocodile Clip Harness
Quick connect 60cm Ring Terminal Harness
Accessory:
State of charge indicator
TECHNICAL SPECIFICATIONS:
Model Number
OC-PRO600
OC-PRO1200
Output
6A @ 12V
12A @ 12V
Input Voltage
100-240Vac / 1.4A/0.75A(95W)
220-240Vac / 1.8A(175W)
Input Frequency
50/60Hz
50/60Hz
Charge Voltage
Gel - 14.1V
AGM&WET - 14.4V
Calcium - 14.7V
Gel - 14.1V
AGM&WET - 14.4V
Calcium - 14.7V
Equalising Voltage
Gel - 14.3V
AGM&WET - 14.6V
Calcium - 15.5V
Gel - 14.3V
AGM&WET - 14.6V
Calcium - 15.5V
Float Voltage
13.6V
13.6V
Start Voltage
3V
3V
Operating Temperature -15 to 50° C
-15 to 50° C
Storage Temperature
-25 to 85°C
-25 to 85°C
Operating Humidity
90% RH Max.
90% RH Max.
Size (L*W*H)
182mm x 88mm x 48mm
214mm x 103mm x 55mm
Weight
0.75kg
1.1kg
Approvals
CE, UL/cUL, AS/NZS, EMC
CE, UL/cUL, AS/NZS, EMC
CHARGING INSTRUCTIONS:
STEP 1 - Pre charge check & electrolyte level check
•
Check the Battery Electrolyte levels (Not required on sealed & maintenance free batteries).
If necessary, remove the vent caps and add distilled water so the levels are halfway between
the upper and lower fill lines.
•
Check the battery voltage, type and Ah capacity to ensure the charger is compatible and to
determine which Battery Type and Charge Rate settings you will use.
•
Ensure the battery is in a well ventilated area and the charger should be as far away from the
battery as the cables permit.
