Operating Instructions
Parts List:
If you are missing any of the below parts please contact
Please be aware that you will be referring to this parts list throughout the assembly
process.
1. Refer to your vehicle owner’s manual for the correct jack
lifting point. This area of the vehicle should be specified by the
vehicle manufacturer.
2. Position the stands under vehicle at points specified by
vehicle manufacturer.
3. To adjust the stands, hold the control lever up while lifting
saddle shaft to the desired height. Push the control lever
downwards to lock pawl into teeth located in central column.
Make sure the pawl is fully engaged with the teeth.
4. Carefully lower the load onto the stands.
USER MANUAL Model No: 4641
