Ensure that the product is on a level surface and the product has been checked over thoroughly.
1. Adjust the height of the repair stand to preferred working height. Use the locking knobs to adjust the height of the
product. Please make sure that all the locking knobs a secure before use. Before lifting the bicycle up onto the flame make
sure that you loosen the locking knob marked as (A) on the below image. Once you have loosened off the locking knob
(A), gently lift the bike into the locking clamp. This proceed may be easier with two people.
Model No: 3059
A
2. Position the clamp in the middle of the top part of the bicycle
frame, as shown in the photo at the bottom of the page marked
(B). Once the clamp is in the right position, slowly tighten the
locking knob (A) be very careful not to over tighten. Over
tightening may result in the bicycle frame cracking or bending.
B
C
USER MANUAL Model No: 3059
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Operating Instructions
