A
B
C
D
F
G
E
H
1 x Allen key for use with cap head screws (A)
1 x Tripod (B)
1 x Adjustable stand pole (C)
1 x Bike clamp (D)
1 x Tool shelf (E)
1 x Front wheel stabilizer (F)
2 x Screws (G)
2 x Grips (H)
Begin by selecting a flat and level surface. Loosen the adjustable knob if needed (part B), pull the legs of the
tripod outwards until they are fully extended. Tighten the adjustable knob (part B) to secure the legs in place.
Now unfold all four feet located at the bottom of each leg part (B). Make sure all the feet are level with the
surface that the product is standing on.
Next, insert the adjustable arm (part C) into the end of the tripod stand (part B). Slide clamp (part D) through
the top of the adjustable stand pole (part C). Make sure all the locking knobs are finger tight, DO NOT over
tighten because this may result in damaging the product. Attached the tool shelf to (part E) using the screws
and Allen key provided. Do not over tighten the screws when using the Allen key. Before moving to the next
step make sure all, the fastenings are attached correctly and are fully secure.
The user is totally responsible for anything that happens to the bicycle when the repair stand is in use. Do
not leave the repair stand unattended at any time when in use. If left unintended it may cause damage to
bicycle.
USER MANUAL Model No: 3059
Assembly Instructions
Parts List:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the below parts, please contact Oypla customer services:
