Oxygen Wheel Chair Ready Type Chamber, Руководство пользователя

Страница: 9 / 16

5. From the Exterior, Connect the Tubes with Air Compressor (Image 5.a), dehumidifier and Chamber
as in the diagram below. Please connect air tubes from Air Compressor to the wet Air In Port of
Dehumidifier and Connect air tubes from Chamber to the Dry Air Out port of Dehumidifier.
There is water drainer on one side of the Dehumidifier. Unscrew (Image 5.b) the black valve to drain
the Water when the drainer is full of water per the diagram on the right.
WET AIR IN
DRY AIR OUT
(Image 5.a)
(Image 5.b)
5. PRODUCT ASSEMBLY AND OPERATION
Operation
1. Switch on the machines and adjust the oxygen generator 1 LPM below the maximum setting.
2. Get into the chamber and pull outside zippers and then the inside zippers closed and (make sure
to flatten out the silicone strip between the zippers)
2A. Close the air deflate valve
Zippers and Air Deflate Valve can be operated both inside and outside the chamber.
or
Pull the inside and
outside zippers
Close the internal
pressure relief valve
anti-clockwise
Close the external
pressure relief valve
clockwise
Pl
ea
se
re
lea
se
pre
ssure
before pull
ing
th
e z
ipp
ers
ATTENTION:
During Operation, once the Hyperbaric Chamber reaches its optimal pressure, per
design excess pressure is released outside the chamber. Hence, any pressure release sound through
the valves while in use is normal.
ON/OFF
ON/OFF
9