Oxygen RKD-3799BT, Руководство пользователя

Страница: 8 / 15

E-7
and ru
pture. (Follow battery manufacturer’s directions).
8. Do not dispose of batteries in fire, batteries may leak or explode.
AC POWER CONNECTION
1. Insert one end of power cord to the AC SOCKET (#30) at the back of the
SB2135BT.
2. Connect the power cord to AC power source.
3. When the unit is operated from AC power source, the internal battery source will
automatically be disconnected
RADIO OPERATION
1. Turn on the radio by setting the FUNCTION SELECTOR (#9) to BT/FM/AM
position.
2. Use the BT/BAND SELECTOR (#11) to choose the AM or FM band.
3. Use the TUNING KNOB (#8) to tune to your desired radio station.
4. Adjust the VOLUME CONTROL (#10) to obtain the desired sound level.
5. To turn off the radio, set the FUNCTION SELECTOR (#9) to TAPE/OFF position.
TIPS FOR BEST RECEPTION
AM - The AM antenna is located inside the cabinet of the unit. If AM reception is
weak, change the position of unit until the internal antenna picks up the
strongest signal.
FM - To insure maximum FM tuner reception, fully extend the FM telescopic antenna
and rotate it for the best FM radio reception.
CD OPERATION
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to fully read all commercial
CDs. They will also read self-compiled CD-R/CD-RW discs but it may take up to 10
seconds for playback to start. If playback does not start, it is likely due to the quality
of the CD-R/RW disc and/or the compatibility of the CD compilation software.
Manufacturer is not responsible for the playback quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a
malfunction.
1. Turn on the unit by setting the FUNCTION SELECTOR (#9) to CD/AUX position,
the POWER ON INDICATOR (#2) will light up.
2. Open the CD door and insert your CD (label up) into the CD COMPARTMENT
(#28). Then close the CD door, the total number of tracks will show on display.
3. Press PLAY/PAUSE BUTTON
（
#21
）
to start playback. The current track
number will show on display. The PLAY/PAUSE INDICATOR (#5
）
will light up.
PLAY/PAUSE
To temporarily stop playing, press PLAY/PAUSE BUTTON (#21). The
PLAY/PAUSE INDICATOR
（
#5
）
will flash. To resume play, press this button again.
STOP