Oxygen RKD-3799BT, Руководство пользователя

Страница: 14 / 15

E-13
SPECIFICATION
POWER SUPPLY
AC 120V~ 60Hz, 14 W
DC 6 x1.5V type R14/ UM-
2/ “C” si
ze batteries (not included)
FREQUENCY RANGE FM 88 -108 MHz
AM 520 -1710 kHz
BLUETOOTH RF Output Power: 4 dBm
Bluetooth 2.402-2.48GHz
Working Distance: Up to 10 meters (32.8 feet) measured in open space (wall and structures
distorted on AM
or FM broadcast. FM.
FM: Telescopic antenna is not
extended.
AM: The bar antenna is not
positioned correctly. station.
Fully extend the FM telescopic
antenna.
Reposition the unit until the best
reception is obtained.
AM or FM no
sound. Unit not set to AM or FM band.
Volume at minimum. Set the band selector to AM or
FM position.
Increase Volume.
CD player will not
play. Unit not in CD function mode.
CD is installed incorrectly.
If the CD is self-compiled, the
media used may not be
compatible with the player. Select CD function mode.
Insert CD with label side up.
Use better quality blank media
and retest.
CD skips while
playing Disc is dirty or scratched. Wipe CD with clean cloth or use
another disc.
CD Intermittent
sound
Tape Playback
muffled or fuzzy Dirty or defective disc.
Dirty Pick Up lens.
Player is subject to excessive
shock or vibration.
Tape head dirty Clean or replace the defective
disc.
Use a CD-lens cleaning disc to
clean the lens.
Relocate the player away from
shock or vibration.
Clean tape head using head
cleaning cassette
No sound on
Bluetooth
The unit is not linked with the cell
phone.
- Speaker placement out of range.
- Volume set too low.
Go through “B
luetooth
Operations”
process to link the
speakers.
- Relocate the speaker within
Bluetooth operating range.
- Rotate the volume knob to
turn the sound level up.
Sound is
distorted on
Bluetooth
- Volume level is set too high.
- Sound source is distorted. - If the cell-phone original sound
source quality is poor, distortion
and noise are easily noticed
with high-power speakers.
- If you are using an external
sound source like older
generation of iPod, try reducing
the output volume on the device
itself.