Mode d’emploi -
SPARKJET U1
V1.1 06/2018
14/16
F- W-DMX
La Sparkjet U1 est compatible avec les emetteurs W-DMX de Wireless Solution.
Pour activer le W-DMX, vous devez appuyer sur le bouton W-DMX ON/OFF dans le coin
supérieur gauche du panneau arrière.
Ensuite, vous devez appairer votre Sparkjet U1 avec votre émetteur W-DMX.
L’état de la LED indiquera l’état de la connexion sans fil:
Non appairé : fixe blanc
Pairé mais pas connecté à l’émetteur : clignote rapidement en rouge
Pairé et connecté à l’émetteur mais pas de DMX: clignote lentement en vert
Pairé, connecté et avec DMX: vert fixe
Pour désappairer, appuyez sur le bouton Pairing pendant 5s, la LED devrait clignoter et passer
en blanc fixe.
Ensuite, pour coupler la Sparkjet U1 à un émetteur, suivez les instructions de votre émetteur.
G- Contrôle à distance
Pour utiliser la télécommande filaire, vérifiez d’abord que le W-DMX est OFF, puis branchez la
télécommande sur l’entrée DMX.
Attendez que la machine soit prête à envoyer l’effet et appuyez simplement sur le bouton
pour obtenir l’effet.
Si vous voulez utiliser 1 télécommande avec plusieurs Sparkjet U1, vous pouvez connecter en
série jusqu’à 4 Sparkjet U1 via le DMX IN et OUT avec un câble DMX à 5 fils.
(USITT 1990 - 5 fils).
5. Technical data
Tension
240 VAC, 50 Hz
Consommation max
700 W
Contrôle
DMX / W-DMX / Télécommande fil
Canaux de contrôle DMX
1 CH
IP Degré
IP20
Température de fonctionnement
0-40°c sans condensation
Dimensions du produit
20 x 20 x 26 cm
Poids du produit
7,8 kg