oxic XD-S16200, Руководство пользователя

Страница: 91 / 142

91
91
4.5.6 Motion Setup
Main Menu Æ Alarm/Motion Setup Æ Motion Æ Channel #
Figure 4.5.6: Motion Detection.
1. Motion Detection:
Use this screen to enable/disable motion detection. There are 1350 motion
zones for each camera, user can enable or disable each zone individually.
If there are activities or intrusions on motion zones, the DVR enables
motion recording.
Use
-
+
to change the type of cursor. Big cursor lets you
enable/disable many zones, and small cursor lets you enable/disable less
zones. Navigate the screen with the zone cursor using the buttons.
By pressing
ENTER
to enable/disable motion zones. Zones with red marks
enable motion detection. Zones without red marks disable motion
detection.
There is a sensitivity scope to adjust the motion detection sensitivity for the
screen. The sensitivity scope is the bar located near the bottom of the
screen. The red mark indicates the sensitivity of motion alarm. Use
to change the level of sensitivity (0~100). The yellow cursor indicates the
activities on motion zones. If motion activity reaches the level of sensitivity,