oxic XD-S16200, Руководство пользователя, Страница: 46 / 142

46
46
2.7.9 Setup
Motion
in DVR Main Menu
1. Go to path: Main Menu
Æ Alarm/Motion Setup Æ Motion Æ Camera #
Figure 2.7.9 Motion Detection
2. Motion Detection:
(1) Use this screen to enable/disable motion detection. There are 1350
motion zones for each camera, user can enable or disable each zone
individually. If there are activities or intrusions on motion zones, the
DVR enables motion recording.
(2) Use
-
+
to change the type of cursor. Big cursor lets you
enable/disable many zones, and small cursor lets you enable/disable
less zones. Navigate the screen with the zone cursor using the
buttons. By pressing
ENTER
to enable/disable motion zones. Zones with
red marks enable motion detection. Zones without red marks disable
motion detection.
(3) There is a sensitivity scope to adjust the motion detection sensitivity for
the screen. The sensitivity scope is the bar located near the bottom of
the screen. The red mark indicates the sensitivity of motion alarm. Use
Encoder ( ) to change the level of sensitivity (0~100). The yellow
cursor indicates the activities on motion zones. If motion activity