Oxdale TM400, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 15

In-depth instructions.
Before first use.
Fitting unit to tractor
The log splitter is designed for fitting to a cat 1 / 2 tractor. This can be on the back end or if required
at the front. The log splitter is to be fitted so that it is level when positioned at the required working
height.
Connect hydraulic hoses to tractor.
Observe the operating instructions issued by the
manufacturer of the vehicle that the log splitter has been
attached to. The log splitter has been designed to have
a constant flow
supply and a free
flowing return.
Return
Supply
The flow and return pipes have been fitted with male ½” quick
release couplings. The supply pipe is connected to the control
valve and is marked “P”. The free flowing return is marked with a
“T”. Connecting these pipes the wrong way round can damage
the control valve.
Greasing
The ram collar needs to be greased where it slides down the guide, this will help to reduce the friction
and help the unit run more smoothly. This needs to be carried out every 10 hours or alternatively at
the start of each day.
6