Oxdale TM400, Инструкция по эксплуатации и техническому обслуживанию

Страница: 10 / 15

Post Operating Checks & Maintenance Instructions
Always stop the machine before cleaning or making adjustments. At the end of each day’s work the
unit should be cleaned. The removal of wood chips etc from the unit is advisable as well as
removing contaminated grease from the wedge collar. Sharpen the wedge as and when required,
this can be done with a file. Check for any loose bolts or other damage at regular intervals. If the log
splitter is going to be stored then this should be in a dry location and safely to avoid knocking the
machine over. The TM400 can be stored in a horizontal or vertical position.
Hydraulic System.
Periodically check the hydraulics for oil leaks, worn hoses and loose fittings, please note that the
pressure within the hydraulic system can exceed 2000 pounds
per square inch (psi). Reinforced hoses develop pin hole
leaks and hydraulic connections can vibrate loose. Hydraulic
leaks may be hard to see. Never check for these leaks with
your hand. The high pressure can inject oil droplets under
your skin. Oil injected under your skin is a medical emergency
and will require immediate medical care. When checking
hoses and fittings these can become very hot from heavy use.
Place your hand near the connection to sense for heat before
touching the connection. If hot, allow the hydraulic system to
cool down before touching the heated connections.
Greasing.
Keep the collar guide of the unit well-greased, this will help the log splitter run more smoothly.
Grease the
collar guide
10