OWT Industries GREENMACHINE GM15703, Руководство оператора

Страница: 10 / 30

8 — English
BLADE CARE

Lubricate the cutting blade after each use.
 Periodically inspect the blade for damage and wear.

If it becomes necessary to have the blade replaced, take
the hedge trimmer to an authorized service center.
LUBRICATING THE BLADE
See Figure 6.
For easier operation and longer blade life, lubricate the
blade before and after each use.

Lay hedge trimmer on a flat surface.

Use a brush to remove debris or clippings from the blade.
Wipe any remaining debris away with a clean cloth.

Apply light weight machine oil along the edge of the top
blade. Wipe any excess oil from the blade.
Occasionally, you should oil the hedge trimmer during
use. Before oiling, stop the hedge trimmer, remove the at-
tachment, then oil. You can then resume trimming. Do not
oil while hedge trimmer is running.
ATTACHING THE STORAGE HANGER
See Figure 7.
There are two ways to hang the attachment for storage.

To use the hanger cap, push in the button and place the
hanger cap over the end of the attachment shaft. Slightly
rotate the cap from side to side until the button locks into
place.

The secondary hole in the attachment shaft can be used
for hanging purposes as well.
STORING THE ATTACHMENT

Clean the attachment thoroughly and lubricate before
storing.

Store the attachment in a dry, well-ventilated place that
is inaccessible to children.
 Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.

Always place the scabbard on the cutting blade before
storing or when the attachment is not in use.
MAINTENANCE
CALL
www.gree
nmachine
tools.com
1-800-332-1631
CALL US FIRST
For any questions about operating or maintaining your product,
call the GREEN MACHINE
™
Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.