Owon tds series, Руководство пользователя

Страница: 67 / 82

6.Communication with PC
62
Figure 6-5 Set the network parameters of the computer
(3) Set the network parameters of the Software. Run the software on the computer;
choose the "Ports-settings" of the "Communications" menu item. Set "Connect using"
to LAN. About the IP, the first three bytes is same as the IP in the step (2), the last
byte should be different. Here, we set it to 192.168.1.72. The range of the port value is
0
～
65535, but the port which under 2000 is always be used, so it is suggested to set it
to the value above 2000. Here, we set it to 3000.
Figure 6-6 Set the network parameters of the Software
(4)
Set the network parameters of the oscilloscope . In the oscilloscope, Press the