7
4.1 To get started, you will need:
• A Zigbee Gateway.
• A mobile phone with a mobile APP installed.
4.2 Adding to the gateway's network
1. Set your gateway to permit joining (see your gateway's manual).
2. Power on the smart relay module and make sure the LED indicator
is flashing (If not, reset it to factory defaults).
3. Make sure the smart relay module is in the range of gateway’s
network. After few seconds the the smart relay module will join the
gateway automatically and the LED indicator will become steady when
successfully joined.
4.Now you are able to control the smart relay module using the mobile
app.
Note:
If the adding is failed, simply reset the smart relay module and
retry.
5
FAQ
Q 1.
Can I control this relay module using a wireless switch?
Yes. You could use a ZigBee wireless switch such as SLC602 wireless
switch to control it rather than using the mobile app. You can refer to
SLC602 guide to pair with it.
Configure Network
4
