6
the current reference value, enter a valid value, and press "ENTER" or "knob" key to
confirm;
Power reference setting: Press "VOLT" and "CURR" key simultaneously or press
"Knob" key three times to edit the power reference value, enter a valid value, and
press "ENTER" or "knob" key to confirm;
Open and close output: Press the "ON/OFF" key to open the output (The "ON/OFF"
key is light), and press the "ON/OFF" key to close the output (The "ON/OFF" key is
OFF);
Voltage/current priority
switching
: Close the output and double-click "VOLT" or
"CURR" key to switch the priority under the Home/auxiliary Home (Switch time is 1
seconds).
SAVE Setting: 1. Under the Home, function setting UI or protection setting UI, if the
Settings are valid, press "SAVE" key to save the common mode data;
On the
application mode setting UI, if the Settings are valid, press
"
SAVE
" key
to save the
application mode data;
Recall setting: 1. On the Home/auxiliary Home, press "RECALL" key to bring up the
recall function option. Press "←↑" Or "→↓" key to select the data type and press
"ENTER" key to go to the recall UI for the data type. Press "←↑" or "→↓" key to select
the pre-called data and press "ENTER" key to confirm the callback data. 2. On the
application mode setting UI, press "RECALL" key to bring up the relevant recall UI,
press "←↑" or "→↓" key to select the pre-called data, and press "ENTER" key to
confirm the callback data;
Local/Remote mode switching: Press
"
L/R
"
to switch the local/remote mode
temporarily in the
Home/auxiliary Home
(for temporary test, the mode is not saved).
Buzzer control: Under the system setting UI, press "←↑" or "→↓" key to select Buzzer,
and press "ENTER" key to enter buzzer control option. Select the corresponding level,
and press "ENTER" key to confirm;
Note: 1. Common mode data includes voltage, current and power reference values as well as
parameters of function setting and protection setting in user Settings.
2. When the key triggers the setting of reference value, the preset area will be displayed
above the corresponding operated element in the setting area. Enter a preset value
through the number or knob key; When the knob triggers the setting of reference value,
the corresponding bit of the element to be operated in the setting area will flash. Through
"
← ↑
" Or "
→ ↓
" key to select the operation position, and then enter the preset value
through the number or knob key.
3. For local/remote mode Settings, see "LCD Menu - > User Settings - > Function setting " in
section for details.
