7
Making Measurements
and remove testing leads from the input terminals.
Measuring Resistance
WARNING
To avoid possible damage to your multimeter or to the
equipment under test, disconnect the circuit power and
discharge all high-voltage capacitors before measuring
resistance.
1) Plug the black test lead into
the
COM
jack and the red
test lead into the
INPUT
Jack.
2) Set the rotary switch to
Ω/
/ range position.
3) Connect the test leads to the
ends of the resistance or
circuit for measurement.
4) Take the reading on the LCD.
To obtain a more precise
reading, you could remove the objects being tested from the circuit
when measuring.
Testing Diode
WARNING
To avoid possible damage to your multimeter or to the
equipment under test, disconnect the circuit power and
discharge all high-voltage capacitors before testing diodes.
