Owon CB432-DP, Быстрый старт

Страница: 8 / 8

8
4.1 To get started, you will need:
• A Zigbee Gateway.
• A mobile phone with a mobile APP installed.
4.2 Adding to the gateway's network
1. Set your gateway to permit joining(see your gateway's manual).
2. Power on the relay and make sure the LED indicator is flashing
(If not, reset it to factory defaults), indicating it is ready to join the
gateway's network.
3. After few seconds the relay will join the gateway automatically
and the LED indicator will become steady when successfully joined.
4. Now you can control on/off status as well as measure the power
consumption of the electric circuit.
Note : If the relay fails to join the gateway's network within one
minute, simply reset the relay and retry.
Configure Network
4