Owon AG1012F Скачать руководство пользователя страница 6

Страница: 6 / 53

1.General Safety Requirements

General

Safety Requirements

Before any operations, please read the following safety precautions to avoid any

possible bodily injury and prevent this product or any other products connected from

damage. In order to avoid any contingent danger, this product is only used within the

range specified.

Check AC power input setting according to the standards in your own country (see page 9,

AC Power Input Setting

Only the qualified technicians can implement the maintenance.

To avoid Fire or Personal Injury:



Use Proper Power Cord.

Use only the power cord supplied with the product and

certified to use in your country.



Product Grounded.

This instrument is grounded through the power cord grounding

conductor. To avoid electric shock, the grounding conductor must be grounded. The

product must be grounded properly before any connection with its input or output

terminal.



Check all Terminal Ratings.

To avoid fire or shock hazard, check all ratings and

markers of this product. Refer to the user's manual for more information about

ratings before connecting to the instrument.



Do not operate without covers

. Do not operate the instrument with covers or panels

removed.



Use Proper Fuse.

Use only the specified type and rating fuse for this instrument.



Avoid exposed circuit

. Do not touch exposed junctions and components when the

instrument is powered.



Do not operate if in any doubt.

If you suspect damage occurs to the instrument,

have it inspected by qualified service personnel before further operations.



Use your instrument in a well-ventilated area.

Make sure the instrument installed

with proper ventilation, refer to the user manual for more details.



Do not operate in wet conditions.



Do not operate in an explosive atmosphere.



Keep product surfaces clean and dry.

Содержание AG1012F






















































Результаты поиска

Содержание AG1012F

Отзывы:

Похожие инструкции для AG1012F

Бренды по названию

Популярные бренды

Owon AG1012F, Руководство пользователя

Результаты поиска

Содержание AG1012F

Отзывы:

Похожие инструкции для AG1012F

Бренды по названию

Популярные бренды