OwnElement NorticDesk Pro Series, Руководство по сборке

Страница: 10 / 17

STEP 4
Foot
Medium
Machine Screw x8
Levelling Stud x4
Loosely attach a Foot to the bottom of each Lifting
Column, using four (4) Medium Machine Screws per Foot.
Once all the screws are in place, tighten them down all the
way in an X pattern.
Attach two (2) Levelling Studs to each Foot.
Repeat this step for each Foot.
IMPORTANT:
If you have purchased a cable management tray that attaches to the
frame, please assemble it before continuing to the next step.
STEP 5
Your desk top may or may not be pre-drilled.
Check both sides of the desk top to see if it has
pre-drilled holes. If it does, it will be the underside
of the desk top. Lay your desk top on a padded
workspace with the underside facing up.
Carefully place the upside-down desk base on the
underside of the desk top. Adjust the width of the
base to fit the desk top by sliding the two halves
outwards.
6
D