90-0761 V4
© 2018 Owlstone Medical Ltd
Proprietary and Confidential
Page 13 of 22
12.
Fit the
support
extender pin
over the
bottom left source
support pin on the mass
spectrometer.
13.
If not already done, fit
the
waveform (RF)
feeder
to the control
module using the
M3x12
screws supplied.
Note the orientation of
this part - with the slope
of the metal to the
outside of the box to get
the correct alignment of
the pins on the bottom of
the
waveform (RF)
feeder
14.
Use the supplied 2.5mm
hex key to tighten all 4
screws.
