26
Disconnect both patch cables from the patch panels and move to the next port on the patch panels.
Repeat
and
for each fiber in the cable under test until all fibers have been tested at 1310nm.
Press
on the ZOOM 2 two times until the wavelength is set to 1550nm.
Press
on the WaveSource once to set the wavelength is to 1550nm (the
LED will now be lit).
Record the 1550nm ‘dB’ loss value for the current fiber under test.
Disconnect both patch cables from the patch panels and move to the next port on the patch panels.
Repeat
and
for each fiber in the cable under test until all fibers have been tested at 1550nm.
green
QUICK REFERENCE GUIDES
Optical Power Meter:
ZOOM 2
Fiber Optic Light Source: WaveSource Series Singlemode Source
PAGE 3 of 3
FIGURE 3
Taking
Readings
LIGHT SOURCE CONNECTOR
PORT NOTES:
– CONNECTOR TYPE MAY VARY
– DO NOT INSERT ANGLED
PHYSICAL CONTACT (APC)
CONNECTOR
1 2 3 4 5 6 7 8 9 10 11 12
1 2 3 4 5 6 7 8 9 10 11 12
dB
2.00
-
1310
nm
SC connectors shown here;
connector style may vary
