OWL Intuition TSE220-120, Начало работы

Страница: 9 / 12

© 2 Save Energy Limited 2012 9
Useful Information
Network OWL Factory Reset:
You can Factory Reset the Network OWL by pressing the reset button while the power is
on. Carefully insert a paperclip into the small hole and hold the button pressed for a mini-
mum of 10 seconds and release. The green LED will flash rapidly. After about 30 seconds
the blue LED will start a steady flash. After a Factory Reset you must work through this
guide again but when following STEP TWO tick “Account Exists” to reuse your original ac-
count and password.
Network OWL Ethernet port LEDs:
These LEDs have the following meanings: Green – link ok / up; Yellow – data activity.