OWL Intuition TSE220-120, Начало работы

Страница: 4 / 12

4 © 2 Save Energy Limited 2012
If your Network OWL does not go online (“triple blip”):
The Network OWL can normally connect to the OWL servers when plugged into a •
normal domestic broadband router which has a default security configuration.
If the Network OWL does not connect within 5 minutes:
•
Ensure that your Internet connection is working by connecting to a familiar site a.
using your web browser.
Check Ethernet cable connections - remove cable and refit a few times at both
b.
ends to remove any dust on the connections.
Try rebooting your broadband router by powering down for 10 seconds and then
c.
power back up. Allow 5 minutes for everything to re-establish itself.
IMPORTANT Note for business users:
If you wish to use a Network OWL connected to a business / commercial LAN then •
please note that it is usual for the internal IT Security Department to restrict which
Internet ports are open for use.
You will need to ensure that ports numbered 5004 and 5222 are opened outbound.
•
Without this the Network OWL will not be able to connect to the OWL servers and
your Intuition system will not function.
Note: The table opposite describes the meanings of the LEDs visible on the front face of
the Network OWL.