15
GB/IE/NI
alarm clock by pressing the latch in the
direction of the arrow and remove the old
batteries.
Insert three new batteries type AA, 1.5 V.
When inserting the battery ensure the
correct polarity. This is shown in the
battery compartment
6
.
Close the battery compartment cover
11
.
Cleaning and Care
Unplug the mains supply
29
from the
socket before cleaning the product.
The product should only be cleaned on
the outside with a soft dry cloth.
Troubleshooting
The product contains delicate electronic
components.
For this reason it is possible that it can be
disrupted by radio transmitting equipment in
the immediate vicinity. Electrostatic discharges
can lead to malfunctions. In this case, press
the RESET button
5
. This will reset the light
alarm clock and perform a brief test of the
LC-display
3
. The light alarm clock is then
ready for use again.
Please note, resetting will erase all settings.
Simplified EU declaration
of conformity
Hereby, OWIM GmbH & Co. KG, Stiftsberg-
straße 1, DE-74167 Neckarsulm, GERMANY,
declares that the product (Wake-up light
alarm clock HG02934-BS), is in compliance
with Directives 2014/53/EU, 2011/65/EU
and 2009/125/EC.
The full text of the EU declaration of conform-
ity is available at the following internet
address: www.owim.com
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the
packaging materials for waste sep-
aration, which are marked with
abbreviations (a) and numbers (b)
with following meaning: 1–7: plas-
tics / 20–22: paper and fibreboard /
80–98: composite materials.
