12 GB
Close the battery cover.
The display
1
will briefly light up and run a brief check of all
display elements.
Alternatively, first remove the batteries from the battery compartment.
Plug the low voltage plug of the mains adapter
29
into the low
voltage jack in the base station and plug the mains adapter into
an easily accessible outlet. The display will permanently light up
and run a brief check of all display elements.
The outdoor temperature field
24
will show an animation of the
reception symbol , indicating the base station is searching for
the signal from the outdoor sensor.
If no outdoor temperature is displayed after 3 minutes,the base
station will stop searching. The animation of the reception symbol
will turn off and the outdoor temperature field will show --._ °C and
--._ %. Most likely, the signal cannot be received due to structural
factors, reinforced concrete walls, the brickwork being too solid,
or the distance between the units. After finding a better location for
the outdoor sensor, reception will need to be restarted.
Press and hold the CH button
17
at the back of the base station
for 3 seconds until the reception signal becomes animated again.
The weather station will automatically start receiving the DCF
radio signal, regardless if signal from the outdoor sensor was
received or not. The clock field
21
will show an animated radio
tower icon , indicating the receiver for the DCF signal is starting
to receive the time.
The DCF signal (time transmitter)
The DCF signal (German time transmission station) consists of time
impulses emitted by one of the most accurate clocks in the world,
located near Frankfurt / Main, Germany.
