6.1 Installing the OWC Multi-Mount into a Mac Pro
Attach the OWC Multi-Mount using the 4 screws that come already in-
stalled in the Mac Pro’s optical drive bracket. You don’t need to remove
the optical drive to install the OWC Multi-Mount, it does make it easier
however and if you encounter difficulty getting the rubber isolation
mounts to slide into the chassis, you can also partially unscrew the opti-
cal drive to allow more flex in the mounting bay.
Once you have the OWC Multi-Mount in place, attach the SATA cables
and use the SATA power “Y” cable to split the existing power cable to 2
separate SATA power connections and attach them to the drives.
OWC Multi-Mount
Chapter 6 - Bracket Installation
6 OWC MULTI-MOUNT INSTALLATION
