5.1 Installing either 1 or 2 3.5" Hard Disk Drives
Begin by positioning the bottom 3.5" hard disk drive with the
connection ports facing away from you, and then pick up the OWC
Multi-Mount 3.5" drive bracket that has the white OWC Multi-Mount
3.5" silkscreening on it.
Place the OWC Multi-Mount onto the bottom 3.5" hard disk drive using
the center Phillips screw - coarse thread - and don’t tighten it all the way
yet. Leave it loose.
Attach a second screw to one of the outside holes, that will make sure
that you have the bracket centered on the hard disk drive. Then, you can
insert the third screw and tighten all 3 of them firmly.
If you are going to install a 2nd 3.5" drive in the OWC Multi-Mount,
continue with installation of that drive now following the same
instructions. You do not have to install 2 drives into the bracket
and can add a 2nd drive at any time.
NOTE: Installation of a 2nd 3.5” Drive requires the removal of your
optical drive due to height restrictions.
OWC Multi-Mount
Chapter 5 - Bracket Assembly
5 OWC MULTI-MOUNT ASSEMBLY
