OWC Mercury Rack Pro mini-SAS, Руководство пользователя и инструкция по эксплуатации

Страница: 10 / 24

2.3 Connections to Computer
1. Plug the power cable into the wall and into the OWC Mercury Rack Pro.
2. Verify the voltage switch is set properly for the country you reside in.
3. Connect the mini-SAS port to your controller card.
If sold as a preconfigured solution, your OWC Mercury Rack Pro is preset as a RAID 5,
using the “Mac OS Extended” format and is ready to use. If you want to change this
configuration, please follow the instructions in Chapter 3 to do so.
A few precautions and notes when using your external storage device:
• Do not expose the product to water or humid conditions.
• Do not cover the enclosure’s ventilation holes.
• Before connecting the device to your computer, install the hard drives.
• For the safe removal of your drive and to assure that no data is lost, always eject or
unmount the drive from your operating system before powering off.
• In order for the computer to access volumes larger than 2TB, both the hard-
ware and Operating System need to support large volumes (e.g.: Windows Vista
32bit/64bit or Mac OS X 10.4 and above).
OWC Mercury Rack Pro mini-SAS Chapter 2 - System Setup
Power Input
Voltage Switch
External mini-SAS Port