OWC Jupiter Callisto, Быстрый старт, Страница: 25 / 30

OWC JUPITER CALLISTO USERS, GROUPS, & PERMISSIONS
22
6.1.2 AFP Guest Access
To enable guest access over AFP, there are three steps.
1. When creating the AFP share, add the user ‘nobody’ to the allow list. ‘Nobody’ is a user that is built into the system and
is used for setting up guest access to shares.
2. Go to the ‘Services’ tab and click the wrench icon to the right of the ‘ON/OFF’ slider for the AFP service. This will bring
up the AFP settings window. Click the ‘Guest Access’ checkbox, then set ‘nobody’ as the guest account. Click ‘OK’ to
save these modifications.
3. Modify the permissions of the filesystem to which your AFP share is pointed. Guest access can only be configured on
a filesystem because the ownership of the pool cannot be changed for security reasons. Click on the ‘Storage’ tab
at the top of the screen, then click on the appropriate filesystem. At the bottom of the screen, click on the ‘Change
Permissions’ icon (a stack of disks with a black key at the top), then in the window that opens select ‘nobody’ as
‘Owner (user)’ and as ‘Owner (group)’. Click ‘Change’ to apply these modifications.
6.1.3 Creating a Windows (CIFS) Share
To create a CIFS share, click ‘Sharing’ at the top of the screen, click ‘Windows (CIFS)’, then click ‘Add Windows (CIFS) Share’
to bring up the following window (
Figure 6.1.3
).
Give the new share a name, then assign it a path by clicking the ‘Browse’ button and selecting the pool or the filesystem
that you would like to share. Click ‘OK’ at the bottom to create the CIFS share.
After the new CIFS share is created, you will receive a message asking if you wish to activate the CIFS service. Click ‘Yes’ to
enable CIFS sharing. If you wish to enable or disable CIFS sharing in the future, click on the ‘Services’ tab at the top of the
screen, then click on the ‘ON/OFF’ slider labeled ‘CIFS’ to toggle the service.
Figure 6.1.3