OWC Envoy Pro EX with USB-C
Device Setup
2
2. Remove the enclosure from the foam bag, turn the
enclosure over then remove the two screws secured at
opposite corners. Set the screws aside.
DEVICE SETUP
2.1 Drive Assembly
1. Remove the enclosure (in the protective foam bag)
and the screw packet from the box. The packet
should contain two drive enclosure screws, one
drive mount screw, and two rubber feet.
4. Set the top portion of the enclosure on a static-free work
surface, face up, then align the M.2 SSD connector with
the black PCIe connector on the Envoy Pro’s circuit
board. Carefully seat the drive into the connector.
3. Remove the bottom cover. Note that the
underside has a thermal pad; the orientation of
the cover will be important later.
5. Using the shorter drive mount screw from the
packet, carefully secure the M.2 SSD to the
drive post.
