3. HOW TO REPLACE THE BELT
Belt Replacement
Page 6
STEP 1
STEP 2
STEP 3
ALWAYS DISCONNECT THE VACUUM AND THE HIGH-VOLTAGE HOSE FROM THE
ELECTRICAL OUTLET BEFORE PROCEEDING WITH THE FOLLOWING MAINTENANCE.
Always follow these procedures to verify or replace the belt in order to avoid damaging
the carpet beater.
The belt installed in the electric carpet beater (powerhead) makes the brush roll turn. It has been specifically designed for
our electric carpet beater and is required to ensure a flawless operation.
1-Disconnect the wand from the
electric carpet beater (powerhead).
2-Turn the electric carpet beater
(powerhead) so that the bottom is
facing you.
3-Remove the 7 screws as illustrated
above.
Turn the electric carpet beater
(powerhead) so that the top part is
facing you and lift the cover (B) to
remove it.
To remove the brush roll cover,
remove the screws as illustrated
above and lift the cover to remove it.
Do not remove the 3
screws in a triangle
formation as these hold
the motor in place
Unscrew the
powerhead cover
Remove the powerhead
cover
Remove the brush roll
cover
