background image

Add-on Camera

WVS1000

User manual

 

 

 

 

 

 

 

   

At the end of the product lifecycle, you should not

dispose of this product with normal household waste, but

take the product to a collection point for the recycling of

electrical and electronic equipment. The symbol on the

product, user’s guide and/or box indicates this.

Some of the product materials can be re-used if you take

them to a recycling point. By reusing some parts or raw materials from

used products you make an important contribution to the protection of

the environment.

Please contact your local authorities in case you need more information

on the collection points in your area.

Dispose of the battery pack in an environmentally-friendly manner

Disposal of the device (Environment)

FCC and IC regulations

FCC Part 15

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the Federal

Communications Commission (FCC) rules. These limits are designed to

provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

  Increase the separation between the equipment and receiver.

to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

the party responsible for compliance could void the user’s authority to

operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. Privacy of

communications may not be ensured when using this device.

To ensure safety of users, the FCC has established criteria for the amount

of radio frequency energy that can be safely absorbed by a user or

bystander according to the intended usage of the product. This product has

been tested and found to comply with the FCC criteria. The Baby unit shall

be installed and used such that parts of the user’s body other than the hands

are maintained at a distance of approximately 20 cm (8 inches) or more.

This Class B digital apparatus complies with Canadian ICES-003.

WARNING

by the party responsible for compliance could void the user’s authority

to operate the equipment.

Industry Canada

Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of

the device.

RENSEIGNEMENTS RELATIFS AUX RÈGLEMENTS DE

LA COMMISSION FÉDÉRALE DES COMMUNICATIONS

’FCC’, ET D’INDUSTRIE Canada ’IC’

Article 15 des règlements du FCC

AVIS

:

 Cet équipement a été testé et s’est révelé conforme aux limites d’un

appareil numérique de classe B, conformément à la Section 15 du

réglement de la Federal Communications Commission (FCC). Ces limites

interférence nuisible sur une installation résidentielle. Cet appareil génère,

utilise et peut émettre des fréquences radio et s’il n’est pas installé selon

les instructions, peut nuire aux radiocommunications. Toutefois, rien ne

garantit que des parasites ne surviendront pas dans une installation

particulière. Si cet appareil cause des interférences nuisibles à la réception

du téléviseur ou de la radio, ce que vous pouvez déterminer en mettant

votre appareil en et hors fonction, nous vous invitons à essayer l’une des

mesures correctives suivantes :

- Réorientez l’antenne de réception.

- Éloignez l’appareil du composant qui reçoit les ondes.

du composant qui reçoit les ondes.

- Au besoin, consultez votre marchand électronique ou un technicien

spécialisé dans le service des radios/téléviseurs pour des

suggestions supplémentaires.

des parties responsables de l’homologation peut retirer à l’utilisateur

son droit d’utiliser l’appareil.

Cet appareil est conforme à l’article 15 de la FCC. Le fonctionnement

est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas

causer d’interférences nuisibles et; (2) Il doit pouvoir supporter les

parasites qu’il reçoit, incluant les parasites pouvant nuire à son

être assurée avec cet appareil.

relatifs à l’énergie générée par les fréquences radio pouvant être

absorbée en toute sécurité par un utilisateur ou par quelqu’un se

trouvant à proximité, dépendamment de l’utilisation prévue du produit.

Ce produit a été testé et s’avère conforme aux normes de la FCC.

L’unité du bébé devra être installée et utilisée de manière à ce que le

corps de l’utilisateur, à l’exception des mains, soit toujours à une

distance d’environ 20 cm (8 po.) ou plus.

Cet appareil numérique de la classe B est conforme à la norme NMB-003

du Canada.

AVERTISSEMENT

autorisé par la partie responsable de la conformité, pourrait annuler

l’autorisation donnée à l’utilisateur d’utiliser cet équipement.

Industrie Canada

Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet

appareil ne doit pas causer d’interférences nuisibles et; (2) Cet appareil

accepte toute les interférences dont celles qui pourraient provoquer le

fonctionnement involontaire de l’appareil.

que les normes d’Industrie Canada ont été rencontrées.

Canada.

Changes or modifications to this equipment not expressly approved by
the party responsible for compliance could void the user’s authorthority to
operate the equipment.

Содержание WVS1000
























Отзывы: