4. Configuration: Router Mode
43
AirLive N.Power User’s Manual
4.4.10 WDS Settings (Repeater)
This is known as WDS Repeater function. Enable this setting to allow remote WDS
equipped AP to extend the wireless signal of N.Power. Up to 4 WDS repeaters can be
connect with N.Power. WDS works by entering the wireless MAC addresses (also known
as BSSID) of remote Access Points.
Encryp Type:
You can use one of the following 4 encryption type.
None:
No encryption is made. This is not recommended as it posts serious
security issue.
WEP:
This is the most compatible type. However, it is also easier for
hackers to break. Use this only if AES or TKIP doesn’t work.
TKIP:
Temporal Key Integrity Protocol, TKIP is more secured than WEP but
less secure than AES.
