Ovislink Air Live Air3GII, Руководство пользователя

Страница: 57 / 78

3.Installation/Un-installation
AirLive Air3GII User’s Manual
53
3.4.4 SNMP
In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a
user the capability to remotely manage a computer network by polling and setting terminal
values and monitoring network events.
1. Enable SNMP : You must check “Local”, “Remote” or both to enable SNMP function. If
“Local” is checked, this device will response request from LAN. If “Remote” is checked,
this device will response request from WAN.
2. Get Community : The community of GetRequest that this device will respond.
3. Set Community : The community of SetRequest that this device will accept.
4. IP 1, IP 2, IP 3, IP 4 : Enter the IP addresses of your SNMP Management PCs. User has
to configure to where this device should send SNMP Trap message.
5. SNMP Version : Select proper SNMP Version that your SNMP Management software
supports.