Overmax X-bee drone 9.5 fold, Руководство пользователя

Страница: 27 / 138

EN
•
When calibrating, do not carry any magnetic items (e.g. keys, mobile phones).
•
When calibrating, keep a distance from large metal objects.
How to lock and unlock the drone
To unlock the drone, short press the lock key ( ). Motors will start and the drone will be
unlocked (fig. 34).
You can lock the drone in two ways:
1.
When the drone lands on the ground, point the throttling valve stick downwards for about
3 seconds. Motors will stop and the drone will be locked.
2.
The drone will deactivate on its own if you fail to take any action for 15 seconds after
it unlocks.
NOTE!
Do not deactivate drone motors with key while it is flying because the drone will fall.
Emergency stop:
If the drone is up to 15 meters away and up to 5 m high, keep the lock key ( ) pressed for about
3 seconds. Motors will deactivate and the drone will be locked. Do not use this option during
a regular flight. This locking method is intended for emergency!
How to control the drone
To control the drone, it is necessary to use sticks on the controller in accordance with the
description below. Figures show sticks in the default control mode 2.
Fig. 35 A – Going up and down
B – Going forward and backward
Fig. 36 A – Turning right and left
B – Going left and right
Test flight
Take the steps below to make sure the drone is working properly.
1.
Place the drone in an open space so that its frontal part and the user look in the same
direction.
2.
Switch the drone and controller on.
3.
Connect the controller to the drone. Perform the device initialization procedure.
4. Run M RC PRO application. Connect the drone to the mobile phone. Enter the camera
interface.
5.
Unlock the drone.
6.
Slowly push the throttling valve stick upwards. The drone will take off. Test turning
left/right.