Overmax Active Cam 3.1, Руководство пользователя

Страница: 21 / 92

to be set up. Hold the “MENU” key for 3s to enter playback,
press the “
<-
” key and the “
+>
” key to choose downward and
upward; then press the “
<-
” key to choose the type for the file
to be opened; press the OK key once to enter the file browse
page; press the “
<-
” key to choose the file to be browsed,
press the OK key to start playing the file. After the play is over,
hold the “MENU” key to exit.
1
．
Hold the POWER key to switch off the DV.
2
．
Press the “+” key to enter the WIFI mode.
3
．
Hold the “+” key to exit from the WIFI mode.
Menu Setup
Press the POWER key to switch on the DV; in standby state,
press the “MENU” key to display video setup/image
setup/system setup.
Press the OK key for changeover; press the “
<-
/
+>
” key to
choose the option to be set up.
1. Choose video setup: press the “<-
/
+>” key to
choose the option to be set up as follows and
then press the OK key to confirm.
1) Resolution: 1920*1080(30 fps), 1280*720(60 fps)
available.
2) Circular video: When this option is off, it will take 30
minutes to record one file until the card is full. If the rest space
of the card is less than 30 minutes, the recording can go on
until the card is full without deleting the previous file recorded.
When this option is on, it will take 15 minutes to record a file in
circular manner.
3)
Date mark: Choose to have date mark and have no date
mark: On/Off.