10400557-002
©2014 Overland Storage, Inc.
Page 5 of 5
http://support.overlandstorage.com
You can get additional technical support on the Internet at the
Overland Storage Support web page
, or by contacting Overland Storage using
the information found on the
page on our web site.
Optional Sliding Rail Kit Instructions
Reinstall Drives
Return the drive assemblies to the bays.
1.
Position a
drive assembly
in front of an empty
bay
.
2.
Slide the assembly in until the
latch
clicks, locking it in
the bay.
3.
Repeat
for
all
remaining drive carriers.
IMPORTANT: To maintain proper airflow and cooling, a drive
assembly or a blank carrier must be installed in
every
bay. No
empty bays are allowed.
Reattach the Bezel
1.
Position the
bezel
with the top and bottom edges aligned
with the slots on the front of the appliance.
2.
Push the
bezel
onto the unit until the retaining clips latch
and the
bezel
snaps into place.
3.
Verify that the bezel is
aligned
properly and that all the
LEDs are visible.
Reattach Cables and Power Cords
1.
Reattach
all the cables
(except the power cord) to their
previous positions.
2.
Attach the
power cord
.
3.
At the front, press the
power switch
to power on the
unit.
NOTE: Refer to your SnapServer XSR 40 Quick Start Guide for
complete cabling details and locations.
Slide
Retaining Clip
Power Socket
Data Cables
