background image

10400557-002

 

©2014 Overland Storage, Inc.

Page 5 of 5

http://support.overlandstorage.com

You can get additional technical support on the Internet at the 

Overland Storage Support web page

, or by contacting Overland Storage using 

the information found on the 

Contact Us

 page on our web site.

Optional Sliding Rail Kit Instructions

Reinstall Drives

Return the drive assemblies to the bays.

1.

Position a 

drive assembly

 in front of an empty 

bay

.

2.

Slide the assembly in until the 

latch

 clicks, locking it in 

the bay.

3.

Repeat 

Steps 1–2

 for 

all

 remaining drive carriers.

IMPORTANT:  To maintain proper airflow and cooling, a drive 
assembly or a blank carrier must be installed in 

every

 bay. No 

empty bays are allowed.

Reattach the Bezel

1.

Position the 

bezel 

with the top and bottom edges aligned 

with the slots on the front of the appliance.

2.

Push the 

bezel

 onto the unit until the retaining clips latch 

and the 

bezel 

snaps into place.

3.

Verify that the bezel is 

aligned

 properly and that all the 

LEDs are visible.

Reattach Cables and Power Cords

1.

Reattach 

all the cables

 (except the power cord) to their 

previous positions.

2.

Attach the 

power cord

.

3.

At the front, press the 

power switch

 to power on the 

unit.

NOTE: Refer to your SnapServer XSR 40 Quick Start Guide for 
complete cabling details and locations.

Slide

Retaining Clip

Power Socket

Data Cables

Отзывы: