10400469-002
12/2013
©2013 Overland Storage, Inc.
Page 5 of 5
http://support.overlandstorage.com
You can get additional technical support on the Internet at the
Overland Storage Support web page
, or by contacting Overland Storage using
Chassis Replacement Instructions
Reattach Cables and Power Cords
1.
Reattach all
cables
to the same connections as before,
with the Client and Storage switches correctly connected.
2.
Attach the
power cords
.
3.
At the front of the node, press the
power switch
to power
it ON.
Important – Read This Before Continuing
If the RAINcloudOS on the new chassis is different from the
version on the disk drives, the appliance goes through a special
initialization and synchronization process that can take up to
10 minutes
to complete. During this time, the Status light
blinks, alternating between a single- and double-blink.
CAUTION:
Under no circumstances should power be removed
while the system is in this state! Doing so may render the
appliance inoperable.
Once initialization is complete, the system automatically
reboots and the Status LED displays a solid green color.
If the RAINcloudOS versions are the same on both the chassis
and drives, the appliance boots normally.
Complete the Exchange
Add Node to Cluster
NOTE: If the node was not running before removing it from the
cluster, contact Overland Technical Support at
docs.overlandstorage.com/support.
1.
Log onto the Web Management Interface and go to
Storage > Nodes
by clicking the
Nodes
quick link.
2.
Click
Add Nodes
and follow the
wizard
to add the
refreshed node back to the cluster.
Return Old Parts to Overland
1.
Place the
old
part
in the anti-static bag and put it in the
replacement part’s box.
2.
Use an RMA to return the part to
Overland Storage
.
For return shipping details and RMA number, go to:
http://docs.overlandstorage.com/return-instructions
1Gb Config
Storage
Client
Client
Storage
St
orage
St
orage
Single 10Gb Config
Client
Client
Dual 10Gb Config
St
orage
Client
Client
St
orage
Status
