Field Service Documentation
3
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
Snap Server 14000
The Snap Server® 14000 Motherboard Tray Assembly
Removing the SCSI and Ethernet Cards from the Old Motherboard Tray
Assembly
1
Unscrew the top screw that attaches the SCSI card bracket to the motherboard
tray.
Set the screw aside in a safe place. You use it later to attach the SCSI card bracket
to the new motherboard tray assembly.
2
Remove the SCSI card.
3
Repeat steps 1 and 2 to remove the Ethernet card from the inner slot.
Top screw
Bracket
SCSI card
Ethernet card
(inner slot)
